ASUS GPU Tweak III vs MemTest86+
ASUS GPU Tweak III
asus.comMemTest86+
memtest.orgSide by side
| Figure | ASUS GPU Tweak III | MemTest86+ |
|---|---|---|
| Price from | Free | Free |
| Free plan | Yes | Yes |
| Free trial | — | — |
| Open source | — | — |
| Windows | Yes | Yes |
| macOS | — | Yes |
| Linux | — | Yes |
| Plans published | 1 | 1 |
| Spec score · PC Overclocking Software | 8.6 (#4) | 7.8 (#13) |
| Purpose | GPU Tweak III is ASUS graphics-card tuning software for adjusting GPU performance and efficiency. | Memtest86+ is a free, open-source, stand-alone memory tester for IA-32, x86-64, and LoongArch64 systems. |
Plans
In their own words
ASUS GPU Tweak III
ASUS GPU Tweak III is free Windows software for adjusting parameters on NVIDIA and AMD desktop graphics cards, including overclocking, voltage, and fan control. OC Scanner automatically optimizes clock speeds for NVIDIA cards and saves a profile without overwriting driver data. The Voltage-Frequency Tuner manages the GPU boost curve through multiple input methods. Profile Connect can load linked overclock, fan-curve, and OSD settings when a selected application runs. Users can configure GPU fans and system fans connected to FanConnect headers with curves or fixed RPM settings. Monitoring includes fan RPM and system power metrics, system information over full-screen apps, and log export for analysis. A hardware plug-in adds real-time component statistics, while the OSD has adjustable display properties. ASUS lists Windows 10 and 11, 2 GB RAM, and 200 MB storage as minimum requirements for most versions. Power Detector+ compatibility is limited to specified ROG cards. The listed stable release is version 2.1.9.5, dated September 18, 2026.
MemTest86+
MemTest86+ is a free, open-source stand-alone memory tester for x86, x86-64, ARM AArch64, and LoongArch64 computers. It uses algorithms including moving inversions and Modulo-20 to detect memory failures and investigate crashes, freezes, or system instability. The tester can access almost all computer memory without operating-system memory or UEFI library restrictions. It can run from legacy or UEFI BIOS, through Linux boot protocols, or from a FAT32 USB flash drive, CD-ROM, or PXE network boot. For PXE, the project documents different binaries for BIOS and UEFI boot as iPXE or PXELINUX payloads. Testing continues indefinitely, with the pass counter advancing after all selected tests finish. The software is licensed under GNU GPL version 2, with no additional restrictions on private or commercial use. Stable and nightly binaries are available, though nightly builds are generated automatically and are untested and unsupported. Secure Boot must be temporarily disabled because the binary is not signed by Microsoft. USB drivers remain in progress, and not all USB devices are supported.