Skip to content
SPECIFICTION
Get listed

BMC64 vs simple-emu-c64

BMC64

github.com

simple-emu-c64

github.com

Side by side

FigureBMC64simple-emu-c64
Price fromFree—
Free planYes—
Free trial——
Open source——
Web—Yes
Windows—Yes
macOS—Yes
Linux—Yes
Self-hostedYes—
Plans published10
Spec score · Commodore 64 Emulators7.9 (#8)7.1 (#20)
PurposeBMC64 is a bare-metal Commodore 64 emulator for Raspberry Pi.It is a text console emulator for Commodore computers and 6502 processors.

Plans

BMC64

  • BMC64Free

BMC64 pricing →

simple-emu-c64

No plans published.

simple-emu-c64 pricing →

In their own words

BMC64

BMC64 is a free, bare-metal Commodore 64 emulator for selected Raspberry Pi boards. Its bundled release also emulates the C128, VIC-20, Plus/4 and PET, including C64 PAL and NTSC variants. It uses VICE, with Plus4Emu available on Raspberry Pi 3 for more accurate Plus/4 emulation. Frames are timed to 50/60 Hz display refresh for smooth scrolling, and the project advertises low input-to-audio/video latency. A reported C64 boot over composite takes 4.1 seconds, with no shutdown sequence required. Wi-Fi and Ethernet support uses such as BBS access and C64 OS networking. Installation involves writing a release ZIP or image to a FAT32 SD card. Required ROM files must come from a legal source, and the minimum C64 ROM set is needed to start. Supported boards are Pi Zero, Zero 2W, Pi 2 and Pi 3; Pi 4 and later are unsupported. An optional local-network web interface manages status and SD-card files and can use a PIN.

Visit github.com

simple-emu-c64

simple-emu-c64 is a text-console emulator for Commodore systems and MOS6502/6510 processors. It supports the Commodore 64, 128, PET 2001, VIC-20, Commodore 16, and Plus/4, and runs text-based Commodore BASIC, 6502 assembly, and machine-code programs. Memory options reflect the different systems, including C64 RAM, ROM, I/O, and character-set banking, plus banking or configuration for the Plus/4, C128, and VIC-20. Input and output are through a keyboard and console; there is no graphics, sound, or sprite support. The emulator also omits cartridges and peripherals such as joysticks, cassette, IEC, and serial devices. D64 disk images are read-only, and PET file loading and saving are not implemented. It runs in a Windows console or in Mac and Linux terminals, and a Windows console binary is available. Building from source requires .NET 7.0 and system-specific Commodore ROMs. The software is free, and its source code is provided under a revised MIT license.

Visit github.com