BMC64 vs Z64K

BMC64 is a free, bare-metal Commodore 64 emulator for selected Raspberry Pi boards. Its bundled release also emulates the C128, VIC-20, Plus/4 and PET, including C64 PAL and NTSC variants. It uses VICE, with Plus4Emu available on Raspberry Pi 3 for more accurate Plus/4 emulation. Frames are timed to 50/60 Hz display refresh for smooth scrolling, and the project advertises low input-to-audio/video latency. A reported C64 boot over composite takes 4.1 seconds, with no shutdown sequence required. Wi-Fi and Ethernet support uses such as BBS access and C64 OS networking. Installation involves writing a release ZIP or image to a FAT32 SD card. Required ROM files must come from a legal source, and the minimum C64 ROM set is needed to start. Supported boards are Pi Zero, Zero 2W, Pi 2 and Pi 3; Pi 4 and later are unsupported. An optional local-network web interface manages status and SD-card files and can use a PIN.

Z64K emulates the Commodore 128, Commodore 64, Spectrum 48/128K, VIC 20, and Atari 2600, with pixel-exact emulation described by its maker. It runs through Java on Windows, macOS, and Linux and requires JRE 8 or later. Downloads include the main JAR, command-line files, a changelog, and a quick guide. Controls include fullscreen, clipboard text copy and paste, reset, mouse capture, and warp mode. C128 controls include switching display modes and toggling the second display; extended keys and function-key mappings are also described. The built-in debugger and SID Analyzer provide additional tools, with the analyzer offering waveform, envelope, oscillator, and combined display modes. Supported disk and tape formats include D64, D71, G64, G71, IMD, and CRT. The Virtual FS device is experimental, and its scratch command simulates deletion without removing files from the host system. Linux users might need to adjust the JAR's permissions to allow execution. Z64K is free.