Skip to content
SPECIFICTION
Get listed

CoreCtrl vs MemTest86+

CoreCtrl

gitlab.com

MemTest86+

memtest.org

Side by side

FigureCoreCtrlMemTest86+
Price fromFreeFree
Free planYesYes
Free trial——
Open sourceYes—
Windows—Yes
macOS—Yes
LinuxYesYes
Plans published21
Spec score · PC Overclocking Software8.5 (#6)7.8 (#13)
PurposeCoreCtrl is a free and open source GNU/Linux application for controlling computer hardware with application profiles.Memtest86+ is a free, open-source, stand-alone memory tester for IA-32, x86-64, and LoongArch64 systems.

Plans

CoreCtrl

  • CoreCtrlFree
  • CoreCtrlFree

CoreCtrl pricing →

MemTest86+

  • Free and open-sourceFree

MemTest86+ pricing →

In their own words

CoreCtrl

CoreCtrl is a free, open-source GNU/Linux application for controlling hardware through profiles. Profiles can launch when an associated Linux or Windows application starts, then restore their settings when it ends. You can also activate a manual profile, which takes priority over automatic profiles; only one manual profile can be active at a time. The project describes its AMD GPU controls as full, covering fans, frequency, power, sensors, and hardware and software information. CPU support is more limited: it includes a frequency-scaling governor control, a package maximum-frequency sensor, and CPU package information. Automatic profiles need an executable binary name, so they cannot be tied to scripts or interpreted-language applications. The available controls depend on the Linux kernel version and hardware. Full AMD GPU control with the amdgpu driver requires a boot parameter and reboot. CoreCtrl is free, with no paid plans stated, and the project recommends installation through a distribution package manager. It is in maintenance mode, with development focused on fixes and upkeep rather than new features or hardware support.

Visit gitlab.com

MemTest86+

MemTest86+ is a free, open-source stand-alone memory tester for x86, x86-64, ARM AArch64, and LoongArch64 computers. It uses algorithms including moving inversions and Modulo-20 to detect memory failures and investigate crashes, freezes, or system instability. The tester can access almost all computer memory without operating-system memory or UEFI library restrictions. It can run from legacy or UEFI BIOS, through Linux boot protocols, or from a FAT32 USB flash drive, CD-ROM, or PXE network boot. For PXE, the project documents different binaries for BIOS and UEFI boot as iPXE or PXELINUX payloads. Testing continues indefinitely, with the pass counter advancing after all selected tests finish. The software is licensed under GNU GPL version 2, with no additional restrictions on private or commercial use. Stable and nightly binaries are available, though nightly builds are generated automatically and are untested and unsupported. Secure Boot must be temporarily disabled because the binary is not signed by Microsoft. USB drivers remain in progress, and not all USB devices are supported.

Visit memtest.org