Skip to content
SPECIFICTION
Get listed

CoreFreq vs MemTest86+

CoreFreq

cyring.fr

MemTest86+

memtest.org

Side by side

FigureCoreFreqMemTest86+
Price fromFreeFree
Free planYesYes
Free trial——
Open source——
Windows—Yes
macOS—Yes
LinuxYesYes
Self-hostedYes—
Plans published11
Spec score · PC Overclocking Software7.8 (#11)7.8 (#13)
LicenseThe repository identifies the software as GPL-2.0 licensed.Memtest86+ is released under GNU GPL version 2 with no restrictions beyond the GPL for private or commercial use.
PurposeCoreFreq is CPU monitoring software with BIOS-like functionalities for 64-bit processors.Memtest86+ is a free, open-source, stand-alone memory tester for IA-32, x86-64, and LoongArch64 systems.

Plans

CoreFreq

  • CoreFreqFree

CoreFreq pricing →

MemTest86+

  • Free and open-sourceFree

MemTest86+ pricing →

In their own words

CoreFreq

CoreFreq is free Linux CPU-monitoring software with BIOS-like controls for 64-bit processors. It reads frequencies, ratios, performance counters, instructions per cycle, C-states, temperature, and documented core-voltage readings. The interface shows processor features, brand and architecture strings, plus a topology map including caches. Its driver exposes controls for Turbo Boost, power management, thermal limits, prefetchers, and hardware-controlled performance states. A daemon and command-line client provide monitoring views and JSON-encoded system information. Listed architectures include Intel and AMD families, Arm A64, RISC-V RV64, and PowerPC64 LE. Requirements include Linux kernel 3.3 or newer and GNU C Library. Installation can use source builds or packages for several distributions. The project is GPL-2.0 licensed and uses shared memory between its kernel module and user-space component. Some virtual machines may hide required registers. Driver signing is required when kernel signature verification is enabled. The interface renders best in ASCII or VT100 terminals.

Visit cyring.fr

MemTest86+

MemTest86+ is a free, open-source stand-alone memory tester for x86, x86-64, ARM AArch64, and LoongArch64 computers. It uses algorithms including moving inversions and Modulo-20 to detect memory failures and investigate crashes, freezes, or system instability. The tester can access almost all computer memory without operating-system memory or UEFI library restrictions. It can run from legacy or UEFI BIOS, through Linux boot protocols, or from a FAT32 USB flash drive, CD-ROM, or PXE network boot. For PXE, the project documents different binaries for BIOS and UEFI boot as iPXE or PXELINUX payloads. Testing continues indefinitely, with the pass counter advancing after all selected tests finish. The software is licensed under GNU GPL version 2, with no additional restrictions on private or commercial use. Stable and nightly binaries are available, though nightly builds are generated automatically and are untested and unsupported. Secure Boot must be temporarily disabled because the binary is not signed by Microsoft. USB drivers remain in progress, and not all USB devices are supported.

Visit memtest.org