Gainward ExperTool vs MoreClockTool
Gainward ExperTool
gainward.comMoreClockTool
igorslab.deSide by side
| Figure | Gainward ExperTool | MoreClockTool |
|---|---|---|
| Price from | Free | Free |
| Free plan | Yes | Yes |
| Free trial | — | — |
| Open source | — | — |
| Windows | Yes | Yes |
| Plans published | 1 | 1 |
| Spec score · GPU Overclocking Software | 8.3 (#3) | 7.2 (#14) |
| Spec score · GPU Tuning Software | 8.4 (#3) | 7.2 (#12) |
| Purpose | Gainward describes EXPERTool as a tuning utility for customized performance enhancements and efficient desktop management. | MCT is a lightweight tool intended to complement MorePowerTool and Red BIOS Editor and replace AMD Wattman for simpler overclocking. |
| Support | Gainward directs product warranty and return handling to authorized distributors or the original store. | The maker directs feedback and discussion to the igor’sLAB community forum and asks users not to contact the editorial team directly about functionality or use. |
Plans
In their own words
Gainward ExperTool
Gainward ExperTool is a free Windows utility for tuning graphics-card performance and desktop management. Gainward positions its dedicated Expert Tool for overclocking. ExperTool II adds flexible fan curve control and a BIOS saving feature, and also offers LED lighting control for ARGB effects. Gainward says fans stop during multimedia or general workloads and start under heavier loads when GPU temperature exceeds 60°C. Download requirements depend on system architecture and Nvidia driver version: the 64-bit download is listed for Nvidia GPUs with driver 436.xx or newer, while 32-bit downloads specify drivers 415.xx or newer and 347.xx or newer. The listed 64-bit package is version 11.13, dated 2025-02-19, and is 16.5 MB. Its supported Windows versions are Windows 7 (64-bit), Windows 10 (64-bit), and Windows 11. Gainward was founded in 1984 and is headquartered in Taipei, Taiwan. Warranty and return handling goes through authorized distributors or the original store.
MoreClockTool
MoreClockTool (MCT) is a free Windows utility for simpler overclocking of newer AMD graphics cards, intended to complement MorePowerTool and Red BIOS Editor. The maker lists RDNA 2 and RDNA 3 support, with RDNA 4 compatibility added in an April 2025 update. Users can enter minimum and maximum clock frequencies in MHz, limit voltage increases, and adjust GPU power by percentage. MCT can save and load multiple settings profiles, including profiles created in Wattman. Its Set control applies changes in real time, while Reset restores factory defaults. It also includes a Memory Fast Timing Level setting and fan controls analogous to Wattman; for further memory and fan settings, the maker points users to MorePowerTool. The download page lists MCT 1.1.11 Version 2, dated 12.04.2025, with ADLX 1.4 support, RDNA4 bug fixes, and an ImageSharpening Sharpen Desktop feature. The maker describes use as experimental and at the user's own risk, warning that higher voltages may damage hardware and that the tool is not intended for all-settings production use around the clock.